Why a Successful Prototype Can Still Be Hard to Manufacture
Creating a prototype is an interesting milestone on the way to producing a new product. Months of development are finally over, and here you have a tangible piece of your product in front of you. However, what you might not know yet is that having a prototype that works does not necessarily mean that it will be easy to manufacture the part. Minor difficulties can arise when producing carbon fiber parts in bulk.
Difference Between Prototype and Production Part
A prototype proves the feasibility of the idea and shows what the future product will look like and how it works. A production part should be produced repeatedly and to the highest standards while being economical for the company. In fact, these two things are very different, and sometimes even experienced engineers are not ready for that.
Prototypes Are Often Handmade
Most prototypes are manufactured in low volumes by highly skilled people who are capable of spending as much time as needed to create the part. Any small details can be corrected by the person who creates the product. Moreover, the prototype parts can be trimmed or polished manually.
Read More: What Italian Investors Should Know About Trading in Fast-Moving Markets
It is okay to spend additional time creating a small number of parts, but when you need to create hundreds or thousands of parts, every additional step becomes time-consuming and costs extra money. It’s important to note that the people responsible for producing your parts may have no connection to the prototype creation process.
Problematic Design Features
Sometimes, certain design features look good on paper but are not easy to create and reproduce. Sharp edges, deep pockets or tight radii can lead to difficulties with laying carbon fiber on the surface. You might encounter defects like wrinkles, resin-rich areas, and so on. Parts without draft angle can become stuck in the mold during the production process and can get damaged when removing them. Sometimes, a small tolerance is achieved on the prototype but cannot be repeated every time when warping and shrinkage of carbon fiber are taken into account.
Tooling Should Be Up to the Standards
The most typical feature of a prototype mold is its rapid and low-cost production. Molds can be created using materials like foam, wood, or even 3D-printed plastic. Although it is ideal for producing a few test parts, it is not designed to endure many heating and curing cycles. To produce the product in large quantities, you will require tooling that is dependable, precise, and long-lasting. Usually, manufacturing firms choose composite tooling because it expands at the same pace as carbon fiber parts and is not distorted during many curing processes. Aerodine Composites is one company that helps manufacturers make the move from prototype to production with tooling designed for long-term use.
How to Avoid Common Mistakes
The best way to avoid those mistakes is to think about manufacturing while designing. The concept of “design for manufacturing” means that the design should be focused not only on performance but also on production processes. It is advised to have your manufacturing partner on board early in the design process. They will be able to identify issues that could cause difficulties and give suggestions for making small adjustments that can make the manufacture of the part easy without altering its performance.
Conclusion
Building a prototype is a significant achievement, yet it is only the beginning of the journey. Hand-built parts, prototype molds and problematic features of the design can make the production of the product more difficult. With the help of planning the manufacturing process and involving experienced manufacturing partner, you can save time and money.
Read More: Gold Purchase Trends Shaping Two Regional Markets
